Samsung ROM AutoPatch Method [Self Create File] 603a3s

🔧 Samsung ROM AutoPatch Method 274ek

If you’re into Android tweaking or repairing Samsung phones, you might’ve heard about the AutoPatch method. It’s a powerful trick to modify the stock firmware — especially the system and vendor partitions — to root the phone, add custom tweaks, or even enable ADB features. k450

Let me break down the entire process I personally follow. No complicated theory, just practical steps that work.

🛠️ Step 1: Dump System and Vendor Partitions 6z4l2m

Start by connecting the phone via USB and enabling ADB. Then open your terminal or CMD and enter:

1. adb shell
2. su (to gain root access)
3. adb shell again

Now, find your block partitions by typing:

ls -al /dev/block/platform/

Then go deeper:

ls -al /dev/block/platform/13520000.ufs/by-name

Once you spot the system and vendor partitions (for example, sda26 is usually vendor), dump them using:

dd if=/dev/block/sda26 of=/sdcard/vendor

Do the same for the system partition.

Now copy both dumped files (system and vendor) from your phone’s internal storage to your PC.

💾 Step 2: Convert to IMG Files 17x2x

Rename the files to:

• system.img
• vendor.img

If the files are in sparse format, convert them using a tool like simg2img. Most of the time, they’re ready to use.

📂 Step 3: Prepare the AP File 4n2lt

Now take your original AP file from Samsung stock firmware.

1. Extract it using 7-Zip or WinRAR.
2. Inside, find the original system.img and vendor.img.
3. Replace both files with your modified versions.
4. Repack the AP file back into TAR format and save it as AP_Patched.tar.

🔧 Step 4: Magisk Patch for Root Access (Optional) 2z6j4o

If you want to root the device, do this:

1. Transfer AP_Patched.tar to your phone.
2. Open the Magisk app and select the AP file.
3. Tap "Patch", and it will create a new file called magisk_patched.tar.

Copy the patched file back to your PC.

🔁 Step 5: Final File Replacement (If Needed) 204v2l

If you want to make additional changes, extract the Magisk patched file, replace the system and vendor files again, and repack the AP file one more time.

This step is optional but useful if you want full control over both Magisk and your modified files.

🚀 Step 6: Flash Using Odin Tool 2o4a61

Now flash the modified firmware with Odin:

1. Boot the phone into Mode
2. Open Odin tool on your PC

3. Load the following:

• BL (from stock firmware)
• (from stock firmware)
• CSC or HOME_CSC (from stock firmware)
• AP → Select your final patched AP file

Click Start and let it flash.

✅ Done! 53173c

Your phone should now boot up with:

• A custom patched system and vendor image
• Root access (if Magisk was applied)
• Your custom modifications already included

⚠️ Important Notes 1r6y30

• Always make a full backup before doing this.
• Make sure you’re using the correct partition names like sda26 — these can vary by device.
• If anything goes wrong, just flash the full stock firmware to recover.

Link 64f2r

File	Details
Link	Click Here to
File Size	32.12 MB
	12345

🧠 Final Thoughts 2s5l1b

This AutoPatch method is super useful for custom development, device debugging, or technician-level tasks like ADB enabling or removing unwanted apps. Once you get comfortable with the process, it’ll become part of your regular toolkit.